Recommended products
CONTACT US
Guangzhou Wind Force Electronic Manufacturing Co.,Ltd
Addr:No.4 Road 2, Caier Industrial and Business Zone, Shiqiao, Panyu District, Guangzhou, China
P.C.:511400
Attn:Cindy Xie
TEL:86-20-66606029
FAX:86-20-66618678
E-mail:audio@biema.com
Your position:HOME >> Products >> GOLDSANGPRO® Series Touring Speakers System >> T power series full-range active speaker  T power series full-range active speaker
T115AⅡpower
FROM:BIEMA AUDIO | TIME:2011-2-19 17:56:02 | visits:

INTRODUCTION: 

Biema Goldsangpro T series are self-powered, top line speaker designed to meet critical requirements in professional applications.Unique combination of precise pattern control, compact size but high power, low distortion and high SPL make it suitable as the main PA for small to mid-sized auditoriums, houses of worship, clubs, shopping malls, airports and hotel ballroom settings. The speakers are also highly effective in delayed fill applications or stage monitoring for arenas and outdoor concert systems.The sophisticated power amplifier is integrated into an accessible,lightweight rear module. The amplification, processing and protection circuitry produce consistent and predictable results in any system design. Dual RS485 terminals enable distant PC control. Thanks to the great processing capacity of the DSP, parameters of input gain,bandwidth, filter, crossover, delay, phase and limiter and be adjusted till your demanded sound.The T series speakers are housed in birch multi-ply enclosure with a textured, hard shell black finish. Either flying by standard ring or pole mounting or even directly sleep down as monitor, allows flexible, quick installation and easy aiming in touring and permanent applications.

FEATURES: 

●Compact size but high power, all integrated into a full system
●Ultra-low distortion and flat response yield remarkable fidelity
●Extraordinarily flat amplitude and phase response for tonal accuracy and precise imaging
●Predictable performance ensures system design flexibility
●Either main PA or Stage monitoring

SPECITICATIONS:

Model T115Apower
Frequency response 40Hz-18KHz +/-3dB
Components BML-L1501;BMH-75A
Directivity angle H80xV80
Impedance 8O
 Long-term Power(RMS) 450W
 Power peak 900W/5Min
  Input sensitivity 0.775V
 Power supply AC180V~260V 50~60Hz
Axial sensitivity 1w/1m 98dB
  M aximum SPL 125dB
  Connection 2 x NL4R speakon
Product dimensions(WxDxH) 468 x 435x 740mm
Shipping dimensions(WxDxH)     569 x 535 x 884mm
  N.W / G.W 45.0kg / 48.5kg

T SERIES MULTI-FUNCTION ACTIVE SPEAKER REAR PANEL:

1. RS485 Connection Port
For DSP data input, usually from PC or RS485
output of another speaker.
2. RS485 Connection Port
For DSP data output, usually link the
speaker with another speaker’s RS485
input port for setting the
DSP parameters simultaneously.
3. USB Connection Port
For DSP data setting by computer.
4. XLR signal input
Pin 1: Ground Pin 2: Positive Pin 3: Negative
5. Level Knob
This knob is used for adjusting the volume.
For louder sound, please turn it clockwise.
For lower sound, please turn it anti-clockwise.Normally it should be set at the maximum position.
6. XLR signal output
This output is for signal link. It can be connected
to the signal input of another speaker.
Pin 1: Ground Pin 2: Positive Pin 3: Negative

7. POWER INPUT SOCKET
Input power accepts AC115V/60Hz or 230V/50Hz.Please do
select the correct input voltage complied with your local power
supply before connection to the power.
8. Power output jack
The jack is used for power linking with another speaker.
9. Power switch
ON/OFF the power of the amplifier. When it is set to ON, the
amplifier is powered up. While it is set to OFF, the amplifier is
powered off.
10.VOLTAGE SWITCH
115V or 230V can be chosen. Please do select the correct input voltage complied with your local power supply.

SOFTWARE PROGRAMMING:

 
TAG:T115AⅡpower
Print || Close
 PREV:T112AⅢ power
 NEXT:Finish

OnlineService

message
message